Archive for the ‘Uncategorized’ Category

William W.

Monday, November 22nd, 2010

Hi Guys got my kits in Friday Nov. 19 , I use one for my paratrooper SKS and the other one my Yugo SKS. Did the paratrooper first with an little filing it went together good. I put the other kit on my Yugo and went together with a breeze. I would like to get a upgraded upper hand guard for my Yugo as I do more shooting with it. It’s a great rifle and would like to keep the heat down on it. The kit is great and I’m glad to get them. My buddys at the range don’t know what I had till I told them and they couldn’t believe it was a SKS. Some day I may be order some more from you guys. Thank for a great kit.
Oklahoma

David J.

Friday, October 29th, 2010

I recently finished putting my new Bull Pup stock on my rifle and I must
say I am overwhelmed by all aspects of the product!

I wait just over a year for mine and I am not disappointed. Thanks.

I understand you will be shipping the front tri-rail later? Is that
correct?

Gary B.

Sunday, October 17th, 2010

Got your stock back last week and it works PERFECTLY assembly was easy and snag free I fabbed a riser from material i had on hand and mounted a LER scope and then fabbed a mount for the

Jim R.

Thursday, October 14th, 2010

I installed the bullpup stock kit today and feel it is far better than I expected.

Christopher J.

Friday, September 24th, 2010

I received my stock kit 09-23-10 and it looks great!  My only concern is that in the zip lock baggie that
has the front tri-rail mount there are no rails only the bracket.  Was this an oversight or am I supposed
to supply my own rails?  Just thought I would ask in case I was supposed to get rails with the bracket.
Thanks again.  The stock looks great.

(Ohio)

Production Starting This Monday 5-10-10

Thursday, May 6th, 2010

The meeting we had with our molder this past Monday was very productive. We determined what kind of jigs we will need to correct the initial cooling issues of two of the parts. Our molder believes the jigs should be done by the first part of this coming week. It was confirmed today that the material for our first run will be in house this Friday 5-7-10. Tomorrow (Thurs.) our molder is beginning a third shift which will enable our molds, that don’t require jigs, to begin to be run Monday morning. To be clear, all of the molds will not be run on Monday morning. This process will take several days. We will have a better idea of how long this process will take after the first day or two. After the parts are produced, several of the parts will require inserts. Once completed, we will have to get the parts to our shop where the final bit of assembly and packaging will take place. We are getting very close to our final count down before shipping starts, which will end our 25% discount and 2 free accessories offer. Please refer to our earlier posts regarding any shipping questions.

Tooling In Customs/Phoenix Gunshow 2/27-2/28

Thursday, February 25th, 2010

This past Mon. 2/22/10 the tooling was picked up and delivered to port customs. We were told that that take a few days to clear customs. It is our understanding they have ships leaving twice a week. We will pass on any information once we are given news.

For those that are in the area, we will see you at the Phoenix Gunshow this weekend.

Final Samples On Their Way/Costa Mesa Gun Show

Friday, January 22nd, 2010

We just got word that our final samples look good and we should get them any day now. We are excited! As soon as we get the samples, and approve them, we will give the OK for the molds to be shipped to the good old USA for manufacturing. We will keep you updated on the progress through our website.

For those of you that are interested, we will be at the Costa Mesa gun show showing our pre-production sample. We would also like to let you know that the customers that pre-purchased will receive their kits before anyone else.

Some have asked why their comments and questions are not showing up on our website. Some of the reasons are we don’t have time to answer the many comments that are posted daily. We set up a FAQ page and suggested that if there are questions you may have that aren’t addressed, then you may email us. We are still working our regular jobs full-time and are using pre-sales only for the production of the stocks. We do not have the funds to hire a full-time moderator to properly respond to misinformation and conjecture.

Update 12-22-09

Wednesday, December 23rd, 2009

As you know, we received our 1st samples from our mold builder, just over a week ago. The final files worked out a couple of issues really well. Going through the samples did reveal there were a couple of prototype changes that somehow did not make it into the final files. Those issues have already been sent back to the manufacturer, and I’m told shouldn’t take long at all to correct.

On another note, we’re doing our best to very soon post another video with one of the real stocks, as well as an installation video.

Also, our store is back open with a purchase button from Gunpal, a company that isn’t all wrapped up in all the PC that goes on these days. We are still dealing with the Paypal issue. In fact, any of you out there who feels compelled to contact Paypal, feel free to contact Stephanie at Executive  Escalations executiveoffice@paypal.com , or call 1-402-935-5073. Just let her know that while you appreciate Paypal’s concern for your protection, frankly, you really just prefer the stock. This is just another obstacle for us to get over…

We will be at the Ontario Gunshow January 2nd and 3rd, for those of you that live in the area.