Attached are pictures of my answer to the need for a buttpad and check rest. Can be found on line as self adhesive 1/8th for the check rest and 1/4in for the buttpad. Works really well. For under $20.00 and some ingenuity and a cool upgrade. Thx for your ingenuity in developing this stock. GWS
Archive for the ‘Feedback’ Category
Gary S. 06-08-16 SC
Wednesday, June 8th, 2016Costa Mesa, CA Gun Show – June 4 – 5
Thursday, June 2nd, 2016Our SKS Bullpup Stock Kit is being sold this weekend, June 4 & 5, at the Crossroads of the West Gun Show in Costa Mesa, CA at the Orange County Fair Grounds. Look for Guns Ammo & Accessories and ask for Mark.
Gary S. 03-30-16 SC
Wednesday, April 13th, 2016I love it! I used a Chinese field model and cut the barrel down to 16.3 inches ,added an sks muzzle break(mig welded), cut grip tape for the pistol grip and trigger, added the p-rail sights from an old m4 , a green dot laser,an inexpensive forward grip, sks sling as seen in my photos. Tapco 20 rd mags seem to be made for this bull pup. Guick change like they are greased , I couldn’t be more pleased. Gas tube functions perfect. No feed problems. Thank you SG works. Great product.
Costa Mesa, CA Gun Show – March 19 & 20
Friday, March 18th, 2016Our SKS Bullpup Stock Kit is being sold this weekend, March 19 & 20, at the Crossroads of the West Gun Show in Costa Mesa, CA. Look for Guns Ammo & Accessories and ask for Mark.
Josh S. 03-12-16 OR
Saturday, March 12th, 2016Andy B. 02-28-16 FL
Sunday, February 28th, 2016I bought a previously “customized” SKS in 1992. It was fun shoot and bad news for a multitude of feral hogs over the years. But it was always really unbalanced and front heavy. It became more like work to have to fight with a long, heavy gun while dragging a dead hog out a swamp. It’s been sitting in the back of my gun safe for about ten years – until I found you! I thought you might like to see the transformation. I just finished it yesterday and haven’t got to go to the range yet but it is now 16 inches shorter, two pounds lighter and just feels way more balanced. Thanks for making my SKS fun to shoot again!!!
John S. 02-04-16 AZ
Thursday, February 4th, 2016Good Morning,
I installed one of your kits on an SKS that I have had sitting in the back of my gun safe for 15 plus years. I am very happy with it, and now the SKS is back in service. It is such fun to shoot. I will attach a picture of the finished piece. I had one difficulty, the spent brass would not clear the ejection port consistently. I removed some material from the cover and it works perfectly.
Picture attached Thank You, John
Hello,
Very nice build. Between 1 and 2% of our customers have the issue with the spent brass having a difficult time clearing the ejection port. We have come to find out the issue is directly related to a higher than usual ejection angle, typically around 12:00-12:30. Our solution has been to slightly steepen the rear wall of the ejection port.
We would like to see what you did with the door in order to alleviate the problem. The bottom 60% of the pic you sent is completely covered in white. Could you resend a pic showing the door? It would be greatly appreciated.
Thanks,
Shernic Gun Works
Good Afternoon, Attached are the pictures of the modification I made to the loading door(flap). I noted where the spent brass was hitting the underside of the door and cut back only enough to allow the brass to clear. I angled the long cut to assist the brass to clear. Thanks, John