Archive for the ‘Testimonials’ Category

Terry M. 01-17-16 TX

Sunday, January 17th, 2016
Greetings,
I just wanted to let you know that the latest gas tube sent appears to be a success! A little bit of fitting with a hand file was required but now I have gas tube that appears to be a correct fit. A trip to the range will confirm this.
I just wanted to thank you for the extra effort you put into helping me get a gas tube that would work. I can’t remember the last time I’ve done done business with a company that was willing to make this kind of added effort to satisfy a customer’s need ( especially, for something as minor as a $30something gas tube )
Your added efforts were definitely noticed and appreciated!
Thank You,
Terry M.

Jim Z. 11-25-15 MO

Wednesday, November 25th, 2015

The kit was awesome thank you guys for all your help
Jim Z

   Before

Jim Z. 11-25-15 MO (1) Jim Z. 11-25-15 MO (2)

Some updated photos to add to my testimonial.
Jim Z. – 02-26-16

After

Jim Z. 02-26-16 (1) Jim Z. 02-26-16 (2) Jim Z. 02-26-16 (3)

 

Richard G. 11-09-15 OK

Monday, November 9th, 2015

This is a great stock! The trigger cable is well thought out. Here is my finished product on a norinco sks paratrooper. The ar carry handle and flip up front sight is very accurate. Thanks!!

Richard G. 11-9-15 OK (1)Richard G. 11-9-15 OK (2)

Shawn R. 10-30-15 UT

Friday, October 30th, 2015

I received my bullpup stock this morning and was very impressed with it. Good solid hardware, very rugged and, after instalation, very comfortable and well balanced. Installation was simple. It took me about 2 hours to fully complete, and im a perfectionist. I only had to sand off about .5mm off the front of the lower piece, then my Norinco paratrooper sks fit in perfectly. The instructions weren’t very explanatory, but it was a fairly self explanatory installation. Im very happy with it, the customer service of your company is fantastic, and it was well worth the time and money. I hope you’ll post this review on your website, along with these photos. Ive already gotten many compliments on the weapon.

Shawn R. 10-30-15 UT (5) Shawn R. 10-30-15 UT (4) Shawn R. 10-30-15 UT (3) Shawn R. 10-30-15 UT (1) Shawn R. 10-30-15 UT (2)

Josh M. 10-20-15 CT

Tuesday, October 20th, 2015
I recently ordered your kit and was excited to see how well I would work. After realizing I needed a longer than normal trigger wire I contacted you guys via email and received a prompt response and was told you guys would send one out to me. Not too much longer I received the LTNTW  in the mail and completed the installation. I took it to the range and before I had even test fired it I had people asking me about it and I had nothing but great things to say about the kit and your customer service. Everything functioned flawlessly. I just wanted to thank you for your great product as well as the superior customer service I received. I will not hesitate to tell others about this kit. Thank you!
-Josh

Robert W. 10-19-15 FL

Monday, October 19th, 2015
I would like to thank you for the great looking and well engineered bullpup stock for the SKS. It went together with no hiccups or problems, about 45 mins and I was testing it out.  A great fit and would buy again wth confidence. SGWORKS was great in customer service and couldn’t ask for a better product or service.
Thank you
Robert W. 10-19-15 FL (1) Robert W. 10-19-15 FL (2) Robert W. 10-19-15 FL (3) Robert W. 10-19-15 FL (4)

Duane W. 10-5-15 ID

Monday, October 5th, 2015

All,
I am including some interesting photos of my Shernic Gun Works SKS Bull Pup modified with a Madhouse DSS – Dual Sight System.  Even though I do not use the pass through on the DSS it puts the sights up comfortably higher making the SKS even more usable then before.   The flip up sights are sighted in for close quarters and the optics sighted in for 75 Yards plus.  The Iron sights look through the optics.

The DSS is very sturdy and very well made just like the Shernic SKS Bull Pup Stock.  I feel this is a great combination.

Thanks,
Duane J. W.

Before

Duane W. 10-5-15 ID (1)

After

Duane W. 10-5-15 ID (2)

With Sights Up

Duane W. 10-5-15 ID (3)

Chris B. 07-21-15 MO

Tuesday, July 21st, 2015

Growing up in Orange County CA. I never had much experience with guns. I moved to Missouri in 2002 and much to my delight … Gun availability was dreamy … More importantly Gun Rights were understood and respected by the locals.

A couple years living here and i had a few guns but was looking for DIFFERENT …  I was approached by a friend who had some guns for sale and offered them to me, I accepted … We went to an FFL to do the transfer and one of them was a Chinese SKS in amazing condition,
So it looked, my first trip to the range i noticed the wood felt kinda “loose” … IT WAS CRACKED … Your bullpup kit saved the day … I LOVE IT … I have been in the midwest for 13 years now and i have found building guns is a hobby … Along with great customer service and an honest description, Their product is a great buy !!

Below are the three different results of what happens when i get bored with the same look … Black n grey is current look !!

Chris B. 07-21-15 MO (1) Chris B. 07-21-15 MO (2) Chris B. 07-21-15 MO (3)

CJ 07-06-15 TX

Monday, July 6th, 2015
To whom it may concern- I completed my SKS/SGW conversion on the 4th of July (no better way to celebrate American independence than by working on a commie rifle, amiright?), and I’m VERY pleased with the outcome! Mine is a Norinco, with 4″ of barrel removed and threaded 9/16-24. The diameter of the barrel is insufficient to provide an adequate shoulder to seat my mount/brake, so I used a jam nut that I polished down such that the wrench flats on the nut line up with the wrench flats on the brake once it is properly indexed to the action. In any event, the SG Works conversion process went REALLY smoothly, especially for a product that is built to fit rifles with such a wide variation in key dimensions. Some light material removal was required in order to get the trigger group to lock in (which in turn allowed for a completely slop-free fit), and a bit more around the bolt cover takedown pin lever. The spacer in the upper hand guard cover was slightly over-sized, which again, allowed me to achieve a nice, tight fit with my op-rod tube.
I topped off the conversion with a Leupold Mark AR 1.5-4 in a Nikon M-223 mount (installed reversed in order to achieve proper eye relief). The can is a Silencerco/SWR Specwar 762… and while I couldn’t find much info regarding suppressing an SKS, I am happy to report that MY gun (I make no promises regarding any other gun) runs great, both with and without the can!! Running Herter’s 122gr HP ammo, there’s still the sonic crack of the round, of course, but the gun seems to handle suppression quite well. I think I’ve found my new hog hunting setup!
CJ 7.6.15 TX

Waylon 06-14-15

Monday, June 15th, 2015

During this build I found that the SKS-M and SKS-D that accepts AK-47 Magazines will accept the following mags with NO MODIFICATION….

Steel AK-47 20 round mag
ProMag 75 round polymer drum
(NOT A “STEEL” AK-47 DRUM,
IT WILL NOT FIT)
Any AK-47 10 round magazine.

With minor modifications to the magazine it will accept a 20 round ProMag.

ANY 30 round magazine will take careful, lengthy, and skilled modification to the SG Works stock.

Still a fun build, quality weapon, and prestigious weapon to own!

IMG_7440IMG_7436IMG_7426 IMG_7427 IMG_7428 IMG_7430IMG_7425image1 image2 image3 image5 image6 image7 image8