Four Down, Two To Go

Today we had another update meeting with our molder. They will be finished tomorrow 5-26-10 with 4 out of the 6 mold runs. Some of the gates and certain parts of the mold had to be polished up better after they began the full scale run, which set back the projected completion times. The jig, which is designed to work on both the main housing as well as the upper receiver cover is almost completed. They are waiting on some lock levers which will lock down the part in the position it needs to remain in. They should arrive any day now. They fully expect to begin running one of the final two molds by Tuesday, June 1st.

On another note, it looks like we are going to have another shop install the inserts. Our molder has never had to heat stake inserts in material as hard as our stock parts before. Without the right machine, it is taking three times longer to insert than anticipated. They have already dropped off sample parts today and should have the answers we need in a day or two. This will help speed up the inserting process.

As our policy has always been for the pre-sale, if the wait becomes an issue for any reason, please contact us for a full refund.

For new users, our latest update regarding shipping is:

Comments are closed.